Your voice sounds thin. Episode 12 is way louder than episode 11. Apple and Spotify keep turning you down. MixDiagnose checks your podcast against the real loudness standards and tells you exactly what to fix — in 30 seconds.
Check your podcast free →Free to start · No signup needed · Results in 30 seconds
The audio problems every podcaster runs into — and why listeners tune out.
Your mic was fine, but the recording sounds brittle in the highs and weak in the lows. Listeners describe it as "tinny" or "grating." You can't tell if it's the mic, the room, or the EQ — and you don't want to buy new gear to find out.
Episode 11 was perfect. Episode 12 your guest was quieter, so you cranked the gain — now it's clipping. Subscribers reach for the volume knob every time a new episode drops. That's when they unsubscribe.
Apple Podcasts targets -16 LUFS. Spotify normalizes to -14 LUFS. If you're outside those, the platforms turn you down — and your episode sounds quieter than every other show in the feed. You didn't know there were targets until your numbers dipped.
HVAC hum, laptop fan, room reverb — low-level noise piles up under your voice and makes the whole thing sound unprofessional. You can hear it in the gaps, but you don't know how much it's hurting the clarity until someone says your show "sounds cheap."
Upload your episode. Get a loudness, clarity, and dynamics readout in 30 seconds.
MixDiagnose reports your integrated LUFS against Apple Podcasts (-16 LUFS) and Spotify (-14 LUFS) side by side. Know exactly whether the platforms will turn you down — and by how much — before you publish.
See where your voice is thin, harsh, or muddy. MixDiagnose flags the bands that make speech sound brittle or boomy and tells you the EQ move to fix it — no audio engineering degree required.
Too much dynamic range and listeners can't hear the quiet parts. Too little and it sounds squashed. MixDiagnose measures your loudness range and tells you when to compress — and when you've overdone it.
Not "your voice is harsh" — but "cut 3 dB at 4 kHz to reduce sibilance, then add 2 dB at 200 Hz for warmth." MixDiagnose gives you the move, the frequency, and the amount. Apply it in any free editor and re-upload to confirm.
Built for solo creators and small teams — no studio, no engineer, no guesswork.
Drop your exported episode, get a full loudness and clarity report. No plugin, no DAW project, no waiting on a freelance engineer.
Apple, Spotify, and YouTube loudness specs built in. Stop guessing what "loud enough" means for each platform.
Applied the EQ? Re-upload and see the before-and-after. MixDiagnose confirms your fix actually worked — so you stop tinkering.
Check every episode against the same target so your feed sounds even. No more "this one's way quieter" comments from listeners.
MixDiagnose spots low-frequency hum and room buildup dragging down your clarity — so you know when noise reduction is worth it and when to leave it alone.
Run your first analysis without signing up. If it catches something you missed, upgrade for unlimited episode checks.
The next episode you publish should meet Apple and Spotify loudness standards and sound clear on every device. Upload it, find out in 30 seconds, and fix it before anyone hits play.
Check your podcast free →Free to start · No signup needed · Results in 30 seconds
Free podcast check
No signup · 30-second results